Recently added

Initial assessment of the video VM 5.0 memory requirements

Bormans, Jan; Gijbels, Toon; Nachtergaele, Lode (1997)

Microcavity LEDs for optical interconnects

Bockstaele, Ronny; Sys, Carl; Blondelle, Johan; De Neve, Hans; Goussaert, Filip; Dhoedt, Bart; Moerman, Ingrid; Van Daele, P.; Baets, Roel (1997)

FIB preparation of cross-sectional transmission electron microscopy specimens of unpassivated device structures

Bender, Hugo; Van Marcke, Pieter; Drijbooms, Chris; Roussel, Philippe (1997)

Hemispherical multilayer structures for CAP-GMR

Attenborough, Karen; De Boeck, Jo; Fransaer, J.; Celis, Jean-Pierre; Borghs, Gustaaf (1997)

Highly uniform AlGaAs/GaAs and InGaAs(P)/InP structures grown in a novel 3x2'' vertical rotating disc MOVPE-reactor

Zhang, X.; Moerman, Ingrid; Sys, Carl; Demeester, Piet; Crawley, J. A.; Thrush, E. J. (1996)

IR PTSI imagers with integrated microlenses

Zagrebnov, Maxim; Baert, Kris; Verbist, Agnes; Franssens, Ghislain; Dhoedt, Bart; Baers, R.; Moelans, I.; Baeke, A. (1996)

Software licensing from the viewpoint of a R&D institute: a case study

Wuyts, Koen (1996)

Property rights in R&D

Wuyts, Koen (1996)

Experimental verification of low-frequency models predicting the signals induced on a microstrip line by an incident field

Wuyts, Ilse; De Zutter, Daniel; Haelvoet, Kurt; Martens, Luc (1996)

Channeled ion beam synthesis: a new technique to form epitaxial rare-earth silicides with high quality

Wu, Ming Fang; Vantomme, Andre; Pattyn, Hugo; Langouche, H.; Bender, Hugo (1996)

Is wavelength translation required?

Wauters, Nico; Demeester, Piet (1996)

Local oxidation of silicon and titanium surfaces with a scanning probe microsope

Vullers, R. J. M.; Daniels, H.; Maenhoudt, Mireille; Van Haesendonck, Chris; Van Hove, Marleen (1996)

Design of a high-throughput microphysiometer

Verhaegen, Katarina; Luyter, W.; Van Gerwen, Peter; Baert, Kris; Hermans, Lou; Mertens, Robert (1996)

Use of advanced packaging techniques for mounting and alignment of optoelectrical components

Vanwassenhove, Luc (1996)

Channeled ion beam synthesis: a new technique to form high-quality rare-earth silicides

Vantomme, Andre; Wu, Ming Fang; Wahl, U.; Pattyn, Hugo; Langouche, H.; Bender, Hugo (1996)

Study of the triaxial cell technique for high-frequency characterisation of shields of multipins connectors

Vanlandschoot, Bart (1996)

Non-destructive techniques for identification and control of processing induced extended defects in silicon and correlation with device yield

Vanhellemont, Jan; Servidori, M.; Higgs, V.; Gramenova, Emilia; Simoen, Eddy; Jansen, Philippe (1996)

Presentations: Recent submissions

Initial assessment of the video VM 5.0 memory requirements

Microcavity LEDs for optical interconnects

FIB preparation of cross-sectional transmission electron microscopy specimens of unpassivated device structures

Hemispherical multilayer structures for CAP-GMR

Highly uniform AlGaAs/GaAs and InGaAs(P)/InP structures grown in a novel 3x2'' vertical rotating disc MOVPE-reactor

IR PTSI imagers with integrated microlenses

Software licensing from the viewpoint of a R&D institute: a case study

Property rights in R&D

Experimental verification of low-frequency models predicting the signals induced on a microstrip line by an incident field

Channeled ion beam synthesis: a new technique to form epitaxial rare-earth silicides with high quality

Is wavelength translation required?

Local oxidation of silicon and titanium surfaces with a scanning probe microsope

Design of a high-throughput microphysiometer

Use of advanced packaging techniques for mounting and alignment of optoelectrical components

Channeled ion beam synthesis: a new technique to form high-quality rare-earth silicides

Study of the triaxial cell technique for high-frequency characterisation of shields of multipins connectors

Non-destructive techniques for identification and control of processing induced extended defects in silicon and correlation with device yield

Feasability of TiSi2 and CoSi2 for sub quarter micron processes

Improved solder joint reliability in polymer stud grid array packages by structural design optimisation

A microsensor array for biochemical sensing

Presentations: Recent submissions

Initial assessment of the video VM 5.0 memory requirements ﻿

Microcavity LEDs for optical interconnects ﻿

FIB preparation of cross-sectional transmission electron microscopy specimens of unpassivated device structures ﻿

Hemispherical multilayer structures for CAP-GMR ﻿

Highly uniform AlGaAs/GaAs and InGaAs(P)/InP structures grown in a novel 3x2'' vertical rotating disc MOVPE-reactor ﻿

IR PTSI imagers with integrated microlenses ﻿

Software licensing from the viewpoint of a R&D institute: a case study ﻿

Property rights in R&D ﻿

Experimental verification of low-frequency models predicting the signals induced on a microstrip line by an incident field ﻿

Channeled ion beam synthesis: a new technique to form epitaxial rare-earth silicides with high quality ﻿

Is wavelength translation required? ﻿

Local oxidation of silicon and titanium surfaces with a scanning probe microsope ﻿

Design of a high-throughput microphysiometer ﻿

Use of advanced packaging techniques for mounting and alignment of optoelectrical components ﻿

Channeled ion beam synthesis: a new technique to form high-quality rare-earth silicides ﻿

Study of the triaxial cell technique for high-frequency characterisation of shields of multipins connectors ﻿

Non-destructive techniques for identification and control of processing induced extended defects in silicon and correlation with device yield ﻿

Feasability of TiSi2 and CoSi2 for sub quarter micron processes ﻿

Improved solder joint reliability in polymer stud grid array packages by structural design optimisation ﻿

A microsensor array for biochemical sensing ﻿

Initial assessment of the video VM 5.0 memory requirements

Microcavity LEDs for optical interconnects

FIB preparation of cross-sectional transmission electron microscopy specimens of unpassivated device structures

Hemispherical multilayer structures for CAP-GMR

Highly uniform AlGaAs/GaAs and InGaAs(P)/InP structures grown in a novel 3x2'' vertical rotating disc MOVPE-reactor

IR PTSI imagers with integrated microlenses

Software licensing from the viewpoint of a R&D institute: a case study

Property rights in R&D

Experimental verification of low-frequency models predicting the signals induced on a microstrip line by an incident field

Channeled ion beam synthesis: a new technique to form epitaxial rare-earth silicides with high quality

Is wavelength translation required?

Local oxidation of silicon and titanium surfaces with a scanning probe microsope

Design of a high-throughput microphysiometer

Use of advanced packaging techniques for mounting and alignment of optoelectrical components

Channeled ion beam synthesis: a new technique to form high-quality rare-earth silicides

Study of the triaxial cell technique for high-frequency characterisation of shields of multipins connectors

Non-destructive techniques for identification and control of processing induced extended defects in silicon and correlation with device yield

Feasability of TiSi2 and CoSi2 for sub quarter micron processes

Improved solder joint reliability in polymer stud grid array packages by structural design optimisation

A microsensor array for biochemical sensing